Prodeck
800/66 & 1000/32 Roof Profiles

Quality:
Prodeck™ is a premium quality product manufactured from galvanised coil to European standard BS EN10147 1992. The substrate is S280GD+Z275 equivalent to BS 2989: 1982 Z 280 with a hot dipped galvanised coating of 275 grammes per square metre.

Thickness:
Prodeck™ 1000/32 is available in 0.7mm, 0.9mm and 1.20mm thick material.

Profile:
Prodeck™ is manufactured in a 32mm reverse profile with a 200mm pitch in a 1000mm cover width or in a 66mm reverse profile with a 200mm pitch in a 800mm cover width.

Tolerances:
All dimensions are subject to roll forming tolerances.

Storage & Handling:
For advice on storage and handling, please consult the leaflet enclosed in each bale for further details.

Manufacture:
Prodeck™ is manufactured by Duggan Profiles & Steel Service Centre Ltd., a Duggan Steel Group company committed to total quality products.

Purlins
To prevent deterioration caused by contact with wet, green or treated timber due to direct or indirect contact with corrosive materials, a DPC barrier must separate roof cladding material when fixed to timber purlins.

Sheets of Prodeck

 


Typical view of prodeck

Typical view of prodeck
 
Typical view of prodeck IBM Campus
Mulhuddart
Duggan Steel (Irl.) Ltd.
Tullamaine, Callan Road, Kilkenny.
Architect: James O'Donoghue & Co.
Engineer: Michael Punch & Partners.