Quality:
Procolor® is a premium quality product manufactured from galvanised coil to European Standard BS EN 10147 : 1992.
The substrate is Fe E 220 G with hot dipped galvanised coating of 200 grammes per square metre.
The substrate is primed and 20 micron of Polyester are applied to the external surface.
Heat Resistance:
Maximum continuous temperature -40°C to +80°C.
Profile:
Procolor® is manufactured in a 32mm deep profile with a 200mm pitch in a 1000mm cover width, with mini-ribs.
(Mini-Ribs can be omitted if specified at time of order).
Tolerances:
All dimensions are subject to roll forming tolerances.
Thickness:
Procolor® is available in 0.50mm thickness in Roof and Reverse profiles. |
Colour:
Procolor® is available in standard colours, Slate Grey and Juniper Green.
Manufacture:
Procolor® is manufactured by Duggan Profiles & Steel Service Centre Ltd.
a Duggan Steel Group Company committed to total quality products.
Storage & Handling:
For advice on storage and handling please consult the leaflet enclosed in each bale of Procolor®.
Accessories:
D.P. & S.S.C. provides a full range of complimentary services and products for their sheeting including Clearlights, Gutters, Trims Flashings and Up-stands.
Full Crimping facilities are available for our 1000/32 Procolor®. |
