Quality:
Proclad® is a premium quality product manufactured from galvanised coil to European Standard BS EN 10326 : 2004.
The substrate is S220 with hot dipped galvanised coating of 275 grammes per square metre.
The substrate is primed and 200 micron of leathergrain embossed Plastisol are applied to the external surface.
The internal surface is galvanised and coated with a 12 micron standard Chalk White (RAL9002) coat.
UV Resistance:
The Plastisol applied consists of Polyvinyl Chloride based Thermoplastic Resins with short molecular chains for better UV resistance particularly suited to the construction sector.
Heat Resistance:
Maximum continuous temperature -40°C to +80°C.
Profile:
Proclad® is manufactured in a 32mm deep profile with a 200mm pitch in a 1000mm cover width, with mini-ribs.
(Mini-ribs can be omitted if specified at time of order).
Tolerances:
All dimensions are subject to roll forming tolerances.
Thickness:
Proclad® is available in 0.50mm and 0.70mm thickness in Roof and Reverse profiles.
|
Colour:
Proclad® is available in standard colours, Goosewing Grey, Olive Green, Moorland Green, Ocean Blue, Wedgwood Blue, Mushroom, Merlin Grey, Van Dyke Brown, Black and White.
Accent colours or Special colours are available. Alternate finishes are available upon request in Pvf2, High Durability and Very High Durability Polyester.
Manufacture:
Proclad® is manufactured by Duggan Profiles & Steel Service Centre Ltd.
a Duggan Steel Group Company committed to total quality products.
Storage & Handling:
For advice on storage and handling please consult the leaflet enclosed in each bale of Proclad®.
Accessories:
D.P. & S.S.C. provides a full range of complimentary services and products for their sheeting including Clearlights, Gutters, Trims Flashings and Up-stands.
Full Crimping facilities are available for our 1000/32 Proclad®. |
