technical support

Further assistance may be obtained by contacting Duggan Profiles on +353-56-7722485
ProSigma+ CLEADER ANGLE
Cleader Rail Cleat ProSigma+ Purlin
3D PDF
General Information

Cleader angle is generally used to provide a fixing face at the top of gable ends. The image above illustrates a typical assembly with cleader fixed to the underside of the purlin, it may also be fixed to the purlin top flange. It is supplied in standard 6m lengths and may be either screw fixed or bolted to the roof purlins. If bolting is to be used the erector must provide all necessary drilling as standard cleader angle is supplied without punching.

The profile dimensions are 70 x 70 and the material thickness used is 2mm. Standard Cleader angle is supplied in galvanised finish however it may be supplied in prepainted steel by special order. Additional details are available by viewing the product drawings available in the Product code and drawings table below.  
How to order

The code and drawings for standard cleader angle are included in the table below. To order the customer must specify the quantity of lengths required (note standard length 6m). If an alternative profile or material is required this should be clearly communicated at time of order.
ProSigma+ Cleader Angle product code and drawings:
Cleader Code: Description: DXF File PDF File
DP-CLEADER Cleader Angle 70x70x2mm x 6m: AutoCad File PDF File
       
Click on the DXF or PDF icons above to download the CAD (.dxf) or .pdf file.

Trouble downloading?
Right-Click on the DXF icon: this will bring up a menu where you can click on either
'Save Target As' or 'Save Link As'.
Then, after saving the DXF file to your computer you can run your CAD software
and open the DXF file that you saved.